Table of Contents
General
For all ARYGON MCU-equipped the default baudrate is always 9600 bauds as this is set by the MCU firmware. If the host bus is USB, the MCU is connected to SiLabs UART-USB bridge.
For devices without MCU the default baudrate of PN532 based products its 115200 bauds, for PN531 based it is 9600 bauds. If the host bus is USB, a SiLabs UART-USB bridge is directly connected to PN53x chip.
APDB2UA33
This device is an OEM-only product, that means this device comes without enclosure and is designed to be embedded in the targetted application.
Theses devices are PN532-equipped with a front MCU connected by UART to host.
Internal parts references
- PIC18LF6621 64/80-Pin High-Performance, 64-Kbyte Enhanced Flash, Microcontrollers with A/D,
- PN532/104 or PN5321A3HN/C106 NXP NFC chip.
Note: A bootloader is installed in the MCU and firmware updates are allowed.
